EverFocus ENVS1600 - Manual (Page 44)

ENVS800 / ENVS1600 / ENVS3200 Installation Manual
44 of 115
Sensitivity Sensitivity of detection, moving slider to right increases
sensitivity, moving to left decreases sensitivity.
Interval Filter function for detection. If slider is moved to right, a
longer period of object appearing in detection zone is
needed to trigger alarm.
Start / Stop Simulation With START SIMULATION you can test, if current settings
are correct.
Detected objects are displayed in yellow, below the video
window appears "Event detected". End the simulation mode
with "STOP SIMULATION".
BASIC
Options:
Life Cycle
Definition, how long the message is shown
Activated Period Permanent (Always Activated) or scheduled function (daily time
period)