EverFocus ENVS1600 User Manual
Page 79
ENVS800 / ENVS1600 / ENVS3200 Installation Manual
79 of 115
The system will list all video locations in table, but if there are any omit, please use
to
insert.
Note: After inserting location, the system will show files count below table.
Step 4: Choose the method of “Verify Only”, and click “verify”. This method will only
check the files without modify. Verify result will show how many files broken or missing.
Step 5: Choose the method of “Repair(Complete)”, and click “Repair” to repair. The
Repair Result will show how many files are fixed and inserted.
Step 6: The repair new database will replace old ones. And the original database will
change file names with extend repair date and time as below.
Note: Open Log is a tool to record repair database recode. It will recode repair method,
file operation, start time and end time.