Grass Valley JSC-2300 SHOT - Manual (Page 48)

48 Ignite JSC-2300 SHOT Director Robotics/Camera Controller Instruction Manual
Section 3 — Installation and Setup
Set Camera Video Characteristics
Note Refer to the Ignite SDC/HDC Robotic Camera Instruction Manual for listings
and descriptions of Camera Settings Menu selections.
1. Using the joystick, position the camera to shoot a white object that fills
at least 50% of the studio monitor screen (necessary for Automatic
White Balance adjustment).
2. Press the Menu button ( Figure 8 ). The HD/SD CAMERA dialog box
( Figure 14 ) appears.
• To set the Automatic White Balance, select AWB .
• To set Automatic Black Balance, select ABB .
• To display the Camera Setting Menu on the studio monitor, select
MENU ON/OFF , then select UP or DOWN to navigate to the desired selec-
tion.
• To highlight a selection to change, select ITEM , then select UP or
DOWN to change its value.
3. When finished, select MENU ON/OFF .