Grass Valley K2 Dyno PA Configuration Manual v.1.0 - Manual (Page 28)

3. On the Distributed LAN tab, select Enable Server .
4. Select the Control network as the DLC network.
5. Click OK .
6. Turn write filter on.
7. Verify that the K2 Summit system is connected to the network.
CAUTION: If the K2 Summit system is not connected to the network,
connect a cable between the Control network to another network port.
Otherwise, when you reboot, the machine will not be able to access the file
system; you will not see the V: drive.
8. Reboot the machine.
9. Proceed to “Installing K2 Dyno PA”.
Related Links
About K2 Summit and K2 Dyno PA DLC configuration on page 24
28 K2 Dyno Production Assistant Configuration Manual 11 June 2010
Configuring the K2 Summit system for K2 Dyno PA