Grass Valley K2 Dyno PA Configuration Manual v.1.0 - Manual (Page 33)

To install the Dyno PA application, follow these steps:
1. Double-click the Dyno-PA file.
2. Follow the installation wizard, and accept the EULA license.
The Dyno PA application is now installed.
3. Once you have installed the Grass Valley platform service and K2 Dyno PA
application, you need to start the Dyno PA application to configure it. Proceed to
Configuring K2 Dyno PA.
Related Links
Installing the Grass Valley platform service on page 32
Starting the K2 Dyno PA application on page 36
11 June 2010 K2 Dyno Production Assistant Configuration Manual 33
Installing K2 Dyno PA