About the fsnameservers file – Grass Valley K2 Dyno PA Configuration Manual v.1.5 User Manual
Page 35
About the FsNameServers file
To use the Browse feature of K2 Dyno PA, the FsNameServers file needs to be
configured on each K2 Summit and Dyno PA machines in the system. The
FsNameServers file contains the Control network port IP addresses for each host name
server in the system (up to a total of three host name servers).
For example, if you have the following:
IP address for the Control network port
on the machine
Machine
10.0.0.1
K2 Summit SAN #1 (Host name server)
10.0.0.2
K2 Summit SAN #2 (Host name server)
10.0.0.3
K2 Summit SAN #3
10.0.0.4
K2 Summit Standalone
10.0.0.5
K2 Summit Standalone
10.0.0.101
K2 Dyno PA #1
10.0.0.102
K2 Dyno PA #2
In this example, the FsNameServers file would look like this:
The FsNameServers file must be located in the
C:\SNFS\Config
directory in each K2
Summit and Dyno PA machines in the system.
15October 2010
K2 Dyno Production Assistant Configuration Manual version 1.5
35
Configuring the standalone K2 Summit system and K2 Dyno PA