Grass Valley K2 Level 3 RAID Dec.09 2005 - Manual (Page 42)

42 Level 3 RAID Instruction Manual November 23, 2005
Chapter 3 Servicing the Level 3 RAID
Interpreting expansion adapter status LEDs
Use the following illustration and table to identify and interpret expansion adapter
LEDs
LED Action Meaning
Ready
(Green) On Module is powered on and initial diagnostics completed normally
Fault
(Orange) On Fault in the module.
Also on at power-on and then off at the completion of the self-test.
Linkup
LED
(Green) On Fibre Channel In port (from primary RAID chassis) is operable and linked
up.
Off or
flashing Self-test or initialization just after power-on.
(4) LINKUP LED (6) Ejector
(1) READY LED
(2) FAULT LED
(3) FC connectors
(FC-IN/FC-OUT)
(5) ENC ID switch