Grass Valley K2 TX/MAM Server Installation v.2.2 - Manual (Page 5)

K2 TX/MAM Server Installation and Service Manual - document version: 2.2 - Page 5
6 Installation and configuration of the TX/MAM main and
backup nodes
The steps for installation and network configuration of the TX/MAM servers are:
1) Place the servers in the rack and connect cables.
2) Configure the TX/MAM servers’ network settings.
3) Configure the main and backup server and the virtual IP-address.
4) Configure applicable ini-files.
Do not use the Dell Quick Installation Guide provided with the Dell CD-ROM package. This guide
includes instructions for using the OpenManage software CD-ROM to install an operating system,
which is not necessary on the Grass Valley product.
Please refer to the Dell documentation for Safety Instructions.