Grass Valley K2 TX/MAM Server Installation v.2.2 - Manual (Page 8)

K2 TX/MAM Server Installation and Service Manual - document version: 2.2 - Page 8
6.2 Configuring the TX/MAM servers’ IP-addresses
The TX/MAM servers do not use their own IP-address for communication with the Smart Playout
Center applications and servers to keep this IP-address available for the backup TX/MAM server.
Instead, a virtual IP-address is used.
 Configure the TX/MAM servers’ real IP-addresses, for example using Yast.
 Configure the TX/MAM servers’ virtual IP-address as described in the next paragraph.
6.3 Configuring the TX/MAM main and backup database server and virtual IP-
address
The main server automatically writes its backups to the backup server, and vice versa.
 To configure the TX/MAM server, run the script db_configure:
# /system/db_configure <enter>
Now follow the screens below.
 Click Yes to continue, No to cancel.
 Click No.