Grass Valley Kaleido Remote Control Protocol Gateway Jan.09 2014 - Manual (Page 28)

24
Gateway Commands
setKMouseColorB
<setKMouseColorA>set mouseColorA="FFBBGGRR"</setKMouseColorA>
Where FFBBGGRR is the hexadecimal triplet for mouseColorA prefixed with the hexadecimal
value FF.
• BB represents the blue component.
• GG represents the green component.
• RR represents the red component.
For example FFFF00FF would set magenta as the key color.
Gateway response:
• <ack/> : The command was recognized by the Gateway.
• <nack/> : The Gateway was not able to recognize the command.
setKMouseColorB
AQ This command is used to set a color to key.
<setKMouseColorB>set mouseColorB="FFBBGGRR"</setKMouseColorB>
Where FFBBGGRR is the hexadecimal triplet for mouseColorB prefixed with the hexadecimal
value FF.
• BB represents the blue component.
• GG represents the green component.
• RR represents the red component.
For example FFFF00FF would set magenta as the key color.
Gateway response:
• <ack/> : The command was recognized by the Gateway.
• <nack/> : The Gateway was not able to recognize the command.
setKMouseColorC
AQ This command is used to set a color to key.
<setKMouseColorC>set mouseColorC="FFBBGGRR"</setKMouseColorC>
Where FFBBGGRR is the hexadecimal triplet for mouseColorC prefixed with the hexadecimal
value FF.
• BB represents the blue component.
• GG represents the green component.
• RR represents the red component.
For example FFFF00FF would set magenta as the key color.
Gateway response:
• <ack/> : The command was recognized by the Gateway.
• <nack/> : The Gateway was not able to recognize the command.