Grass Valley Kaleido Remote Control Protocol Gateway Jan.09 2014 - Manual (Page 30)

26
A Typical Session
Opening an HyperTerminal Session
To establish the HyperTerminal session with the multiviewer
1 In Connection Description, type a name for the connection, select an icon from the list,
and then click OK.
The Connect To window appears.
2 In Connect To, select TCP/IP (Winsock), from the Connect using list.
Two new boxes appear in the window.
3 In Host address, type the IP address of the multiviewer system.
4 In Port number, type 13000 . This indicates that the connection to the Kaleido will be
established via port 13000.