Grass Valley KAM-ENC-2AES v.4.0.1 - Manual (Page 27)

KAM-ENC-2AES Instruction Manual 27
KAM-ENC-2AES Links and Web Pages
Warning/Fault Summary
The following warnings and faults are reported in the summary section
(refer to
Figure 11 on page 26 ). A Fault indicates a serious condition that pro-
hibits proper operation. A Warning indicates a condition which may or may
not adversely affect operating conditions, but should be noted. Usually
warnings are something the user can correct by changing configuration,
settings or input signals.
Warnings
• WARNING - Rear Module is not connected
• WARNING - Wrong Rear Module (incompatible with Kameleon)
• WARNING - Wrong Rear Module (no communication)
• WARNING - Wrong Rear Module (unknown type, incompatible)
• WARNING - Video Input is 625 and reference is 525 lines
• WARNING - Video Input is 525 and reference is 625 lines
• WARNING - Video Input is 625 but configuration is 525 lines
• WARNING - Video Input is 525 but configuration is 625 lines
• WARNING - Video Input Signal not detected
• WARNING - Frame Reference is not present
• WARNING - Frame Reference is not locked to input
• WARNING - Frame Reference is not present
• WARNING - No Video output - GenLock selected but not present
• WARNING - 1 or more Audio Input signals not detected
• Internal Error - Unknown sub module type
Faults
• FAULT - nnV power supply bad. (nn = variable: 24 V, 12.5 V, 5 V,
3.3 V, 1.5 V, -5 V, or -12.5 V)
• FAULT - A/D failed (A to D system measuring power supplies and bus
levels)
• FAULT - Xilinx 1 failure (main video processor)
• FAULT - Xilinx 2 failure (main audio processor)
• FAULT - MFM (Multi-function module) EEPROM checksum fails
• FAULT - DS1803 not responding (digital potentiometer for video in
adjustment)
• FAULT - TMC22051A not responding (composite input decoder)
• Internal Error - Unknown front module type