Grass Valley KAM-ENC-2AES v.4.0.1 - Manual (Page 34)

34 KAM-ENC-2AES Instruction Manual
KAM-ENC-2AES Links and Web Pages
Video Input Select Web Page
Use the Video Input Select web page ( Figure 17 ) to:
• Configure input video line rate,
• Enable or disable Loss of Signal reporting for the input signal and
frame reference to the Status web page and SNMP monitoring (refer to
the 2000NET manual for SNMP information),
• Enable or disable the SDI Error status warning,
• Configure Vertical Blanking Interval (in Advanced mode), and
• Select the output timing reference.
Figure 17. Video Input Select Web Page – Standard View
Use
this
link