Grass Valley Kameleon HD Multi-Function Modules v.3.2.0 - Manual (Page 49)

KAM-HD-MULTI—Instruction Manual 49
Kameleon HD Links and Web Pages
Output Timing
For all modules, an output timing source can be selected from the fol-
lowing:
• Frame Reference – when Frame Reference is selected, modules with frame
sync capability (KAM-HD-FS and KAM-HDD-FS) can be genlocked to
the frame reference inserted into the 2000 frame. For these modules, a
Frame Sync web page provides horizontal and vertical timing and
freeze modes.
For modules without frame sync, when the Output Timing source is
selected as
Frame Reference , the start of any line of the output signal will
sync to the start of any horizontal line in the frame reference.
• Input – selecting this control will set the timing of the module relative to
the input video signal of the module.
Split Screen
Use a horizontal or vertical split screen to compare the unprocessed input
video (top or right) to the processed output video (bottom or left).
• Split Enabled – enable the split screen by checking the Split Enabled
checkbox.
• Orientation – set the orientation of the split screen with the Vertical or Hor-
izontal radio button.
• Position – use the Position control to set the amount of horizontal or ver-
tical split (10 to 90%) of unprocessed video to appear on the screen.
This control is the same as the other Split Screen controls on the Color Cor-
rection, HD Video Proc, and SD Video Proc web pages.