Grass Valley Kayenne XL Package Installation v.7.0.4 - Manual (Page 191)

Kayenne XL Package — Installation and Service Manual 191
Assignment of Panel Stripe Connectors
Assignment of Panel Stripe Connectors
The port order can also be edited at runtime via the Transition module. This
will be necessary when the port order in the config file doesn't match the
cabling between PCU and panel stripes.
• Activate stripe assignment mode by pressing the rightness three
buttons above the fader of any Transition module simultaneously.
Figure 183. Control Panel Fader
• Follow the displayed instructions Use K1 thru K2 Buttons to set ME Stripe
number. Stripe 1 is top of Panel. Me Stripe =2 PCU Port =2' 
Press Key1 button in topmost stripe's transition module.