Grass Valley Kayenne XL Package Installation v.7.0.4 - Manual (Page 51)

Kayenne XL Package — Installation and Service Manual 51
Control Panel Assembly
Insert the System Bars:
• For installing the Extended System Bar first connect the flat cable.
• Place the System bar into the appropriate position.
• Tighten it with the screw without pushing down. The module pulls
itself into the plug while tightening the screw.
•
Changing the Display-Protecting Glasses
Next to the Displays are small grooves where you can pry off the Display
with a small slot screwdriver.
Control Panel Tray-PCU Connections
Connectors on the outside bottom of the tray connect to the PCU, using a
special multi-pin cable that carries both power and communications sig-
nals.