Grass Valley KayakDD-1 Installation - Manual (Page 63)

KayakDD-1 Digital Production Switcher
7.2.3 Software Loading/Update
• Select the respective device in the menu list.
• Menu Software Update appears
• Push button Start Install.
• The correct software will be installed in the respective device
(MF or CP) automatically.
NOTE!:
Two partitions are availably in the flash for the application software. With "Start Install"
the empty or a partition which is older as the active partition (recommended) will be
updated. With "Install Part. X” the current active software will be updated.
Figure 20 Device Control Menu with Software Update Dialog
62 Planning and Installation Manual