Grass Valley Kayenne K-Frame Installation Planning Guide Dec 03 2014 - Manual (Page 19)

KAYENNE K-FRAME — Installation Planning Guide 19
Section
4
Control Surface Installation
Overview
A typical Kayenne control surface has a modular Control Panel, a Menu
Panel, and is driven by a Panel Control Unit (PCU) frame. Additional Menu
Panels and Satellite Panels are available as options.
A Control Panel consists of system operation modules, which mount into
trays, which are in turn held in place by a Control Panel support structure.
One Control Panel tray filled with modules is called a Stripe. Various
numbers and types of modules and trays can be combined to create a wide
variety of control surface functionality.
The Control Panel and Menu Panel’s processing electronics are located in
the PCU. The Stripes and Menu Panels are connected to the PCU via multi-
pin cables that carry power and communication signals.
Kayenne Control Panels ship to the customer as boxed Stripes, which are
assembled with the support structure on site. You will need to know what
Control Panel configuration(s) you intend to use at your facility in order to
plan your installation effectively.
The Kayenne Control Panel support kit uses 30mm series components
sourced from Bosch Rexroth.
Control Panel Assembly
Support Structure Assembly Required
CAUTION Assembly of the Control Panel support structure is nontrivial. Do not attempt
assembly without first reading the detailed instructions in the separate
Kayenne K-Frame Installation & Service Manual.
If you purchased commissioning with your K-Frame system, assembly of
the Control Panel support is included as part of the commissioning.