Grass Valley Kayenne K-Frame Installation Planning Guide Dec 03 2014 - Manual (Page 8)

8 KAYENNE K-FRAME — Installation Planning Guide
Section 3 — Introduction
Features
General
• Fully digital 10-bit 4:2:2 video switcher including Future-Ready 4K and
1080p (level A or B) support.
• Optional smart I/O modules provide up/down/cross-conversion
when licensed with SetDef and MatchDef.
• Integrated Macro Builder/Editor allows users to edit macros online or
offline on a PC running the menu application.
• Optional DoubleTake™ (split M/E mode) effectively increases the
number of M/Es and adds flexibility to Suites operation while
FlexiKey™ programmable clean feed mode supports separately pro-
grammable configurations of keyers from four M/E outputs.
• Aux bus transitions for dissolves and wipes on aux bus outputs.
• Interfaces with Grass Valley routers and Kaleido Multiviewers and
their control systems.
• Optional Integrated Image Store capable of delivering up to 32 GB
storage of Stills (3,000 images) or “Movies” (a total of 50 seconds) of
1080p video.
• LDK Series and LDX Series camera control with Ethernet tally via
Connect Gateway.
• Optional integrated external ClipStore provides multiple channels of
video/key pairs for up to 10+ hours of nonvolatile video/key/audio
clip content.
• 999 macros with many new ways to recall macros from the Control
Panel.
• 1,000 E-MEM registers with Define E-MEM for fine control in creation
and editing of effects.
• Optional M/E Previewer provides a method to check and monitor any
input to an M/E.
• VDCP Ethernet connection for stadium applications.
• Ethernet tally connection for integration with external tally systems.
• Optional RGB color correction on M/E buses and aux bus outputs.