Grass Valley M-2100 User Manual
Page 53
MMCP Installation/Operation Manual
2-29
Keyer Controls and Operation
2.
Adjust the matte using the
Brightness
,
Hue
, and
Saturation
potentiometers
(while holding down the
Mode/Function
button.
3.
Continue to press and hold the
Mode/Function
button.
4.
Press and release the
Matte
button.
5.
Release the
Mode/Function
button and the new matte values are now
stored as the defaults.
These default settings can be stored in the database on the Configura-
tion Manager GUI PC for later recall by transferring the configuration
from the FCM to the Configuration Manager.
To recall the currently configured matte defaults to the selected keyer, the
keyer must be in modify mode. Perform the following steps:
1.
Press and hold the
Mode/Function
button.
2.
Press the
Keyer
button to which you want to recall the default. The matte
color will be set to the default value. All keyer defaults will be recalled,
including the default matte values.
Note
The matte enabled may not be the default value.