Grass Valley M-Series iVDR Upgrade Kit Installation - Manual (Page 49)

6 July 2004 M-Series Upgrade Kit Manual 49
Replace the top cover
Replace the top cover
Power-on the iVDR and test the DVD drive
The software driver required for the DVD drive is pre installed on the M-Series iVDR.
This allows Windows to immediately recognize the DVD drive at boot time. The
DVD drive is assigned the drive letter “F”.
1. Connect the iVDR power-cord.
2. Power-on the iVDR using the front standby switch.
Wait for Windows to initialize. AppCenter starts automatically.
Windows automatically recognizes the DVD drive.
3. Test the DVD-drive as follows:
a. In the AppCenter toolbar, select Clips .
b. In the Clips pane, select the context menu button , then choose Send to .
The Send to dialog box appears.
Push latch and
lower the front
panel or door 4
4
2 1 Replace
rear
screw
3 Replace top
screw
Replace top cover
and push forward
1 cm to latch