Mounting and formatting drives, Mounting a drive – Grass Valley Maestro Master Control Branding Engine v.1.6.0 User Manual
Page 50
50
Maestro — Branding Engine Quick Start Guide
Section 2 — Hardware Installation
Mounting and Formatting Drives
Hard drives installed in the drive cage must be mounted and formatted
before branding content can be copied to the drives. Drives received from
Grass Valley have been formatted and tested prior to shipment.
Note
Installing a drive may be done with the Maestro Processor board installed in
the frame and running. There is no need to remove the board in order to
install a drive.
Mounting a Drive
Each drive has a push button for mounting the drive as illustrated in
.
Figure 27. Branding Engine Drive Mount Buttons
To mount a drive, push the mount button associated with that drive.
If the drive mounts successfully, the mount LED (see
), for that
drive is illuminated.