Grass Valley Maestro Master Control Branding Engine v.1.6.0 - Manual (Page 53)

Maestro — Branding Engine Quick Start Guide 53
Mounting and Formatting Drives
Figure 30. Disk Partitioning Command and Status
5. If desired, verify the partition by entering the following at the
command prompt:
chkdsk “/ataX” where X is the ata disk number (0-3) of the disk.
Note The quotation marks around the ata disk designator are required.
Verifying the partition may take a while to complete. After verification,
information similar to that in
Figure 31 will be displayed.
Figure 31. Partition Verification Information
Note Disk verification may cause the Maestro Processor to temporarily lose com-
munications with the Deployment Center.