Grass Valley NV5256 v.1.8 - Manual (Page 36)

28 Rev 1.8 • 08 Jul 11
4. Configuration
UniConfig—Stage 1
2 Launch UniConfig. In the Communications menu, check ‘Serial’:
3 Then choose ‘Setup’ from the Communications menu, The following window appears:
Specify your PC’s COM port. Choose 9600 for the Baud rate.
4 From the Windows menu, choose ‘Configuration’. The following window appears:
Click ‘Read All’ to obtain the NV5256 parameters and the router control card’s software and
firmware versions.