Point – Grass Valley Pegasus User Manual
Page 15
Advertising
![background image](/files/814146/content/doc015.png)
11
CHAPTER
1
CHAPTER
2
CHAPTER
3
CHAPTER
4
CHAPTER
5
Contents
Introduction
Setup
Using HQ RECORDER
Settings
Appendix
6
Connecting the (4pin-4pin) audio cable to the Pegasus board.
Audio cable
(Unbranched end)
7
Slide the Pegasus board firmly into a PCI Express slot and temporarily
secure it.
8
Connect the (4pin-4pin) audio cable to a sound device.
POINT
For more details on audio output (from an on-board sound device or
sound board), see "Audio output" on page 12.
9
Confirm that the board and the cables are properly connected, and screw
in the bracket that secures the board.
10
Replace the PC cover.
11
Reconnect the cables, including the power cable.
Advertising