Scheduled capturing from asuspended state, Scheduled capturing from a suspended state – Grass Valley Pegasus User Manual
Page 39
![background image](/files/814146/content/doc039.png)
CHAPTER
1
CHAPTER
2
CHAPTER
3
CHAPTER
4
CHAPTER
5
Contents
Introduction
Setup
Using HQ RECORDER
Settings
Appendix
Scheduled capturing from a
suspended state
To execute scheduled capturing from a suspended PC system, complete the
following:
1
Create a schedule in the schedule settings dialog.
2
Close the main screen and minimize HQ RECORDER to the task tray.
3
Suspend the PC to standby or sleep mode.
NOTE
To activate scheduled capturing when the system is suspended,
suspend the PC with HQ RECORDER minimized to the task tray. You
can specify the delay time, if it takes too long to start scheduled
capturing after the PC is activated again. You can specify after how
many seconds the PC should start up before the specified schedule,
in [Wait time for start of capturing] (see page 40) on the settings
dialog.
•