Grass Valley Pegasus - Manual (Page 31)

7
CHAPTER
1
CHAPTER
2
CHAPTER
3
CHAPTER
4
CHAPTER
5
Contents
Introduction
Setup
Using HQ RECORDER
Settings
Appendix
Auto capture
Captures automatically, detecting the input signal.
1
Click the Input preset and choose an input source and a capturing format.
Note that the video signal should not be input at this point.
2
Specify the destination folder and file name.
3
Click the [Capture start] button
Capturing is paused.
4
When an input signal is detected, the capturing starts.
Once the input signal breaks, the captureing stops.
When the capturing duration is specified, the capturing continues for the
duration.
*
*
*