Grass Valley ASD-771p - Manual (Page 12)

ASD-771p/75/110 - Guide to Installation and Operation
5
3 Installation
3.1 Power Supply
The power supplies LKS-WSA and LKS-WSE, for 110V and 220V
operation respectively, are used to power the ASD-771p/75/110.
Each power supply provides a regulated +5VDC@750mA power
source.
Plug the power supply into a wall or power bar outlet. The ASD-
771p uses a mini XLR-3 connector for its power needs; figure 3.1
provides a detailed pinout of the male connector.
Figure 3.1 Power connector pinout
3.2 Analog Inputs
ASD-771p/75 and ASD-771p/110
Refer to configuration section for the input level adjustment and
test mode configuration.
Analog Audio In
Connect a balanced analog stereo audio signal to the two female
XLR3 connectors labeled LEFT and RIGHT. Refer to figure 3.2
for connector pinout.
1 3
2
+5VDC
GND
Shield