Grass Valley DVCPRO Board Upgrade - Manual (Page 38)

DVCPRO Board Installation
38 DVCPRO Upgrade Installation
Verifying Installation
Verifying installation consists of:
• Using Configuration Manager to Verify Installation
• Performing Functional Tests
Using Configuration Manager to Verify Installation
You can use the Configuration Manager to verify the proper initialization of the
DVCPRO CODEC boards by looking at the bottom of the Configuration Manager
window to ensure DVCPRO boards appear in the slots where they are installed
(J11 and J12).
To check for recognition and initialization of the DVCPRO boards in a PDR 200:
1. From the Windows NT 4.0 desktop, open the Configuration Manager
window by choosing Start | Programs | PDR Applications | Configuration
Manager .
2. Check the bottom of the window for the presence of the DVCPRO boards as
shown in Figure 8.
3. Choose File | Exit .