Grass Valley Profile Analog Composite Monitor - Manual (Page 32)

Monitor Board Installation
32 Analog Composite Monitor Installation
Audio I/O Audio Clock Cabling
Figure 6 shows an example of an Analog Composite I/O board installation in a
PDR 100 with two Analog Audio I/O boards. In the Figure 6, audio clock cable
connections are from:
• Analog Composite I/O Channel A to the RECORD connector on the Analog
Audio I/O board in the lowest numbered slot from slot J5 to slot J15.
• Analog Composite I/O Channel B to the RECORD connector on the Analog
Audio I/O board in the next lowest slot.
• PLAY connectors on both Audio I/O boards to any of the system clocks on
the RefGen board, or to any board which has system clock connectors (such
as the Analog Composite Output board).
Figure 6 is an example only. If you have other video boards installed, or add Audio
I/O boards,, you will have to determine which video source you want to use for the
audio clock signals and make Audio I/O board connection adjustments
accordingly.