Grass Valley T2 Classic iDDR AMP Remote Control SP4.3 - Manual (Page 10)

10 T2 Users Manual –AMP Remote Control– October 17, 2011
Transport controls
○:
Supported
Command
Channel-
less
mode
R1
P1/P2
Normal
mode
3D
Sync
mode
Fill/Key
mode
Supplementary note on T2 operation
2X.00 Stop No
○ ○ ○ ○
Specifying the timecode value on the
command execution (Event Schedule) is not
supported.
2X.01 Play No No
○ ○ ○
Specifying the timecode value on the
command execution (Event Schedule) is not
supported.
2X.02 Record No
○
No No No
Specifying the timecode value on the
command execution (Event Schedule) is
supported only when the input type is LTC or
VITC (SDI).
20.0F Eject No
○ ○ ○ ○
20.10
Fast
Forward
No No
○
No No
Plays back the video at 32 times the normal
play speed.
2X.11 Jog Forward No No
○
No No *1
2X.12
Variable
Forward
No No
○
No No *1
2X.13
Shuttle
Forward
No No
○
No No *1
20.20 Rewind No No
○
No No
Plays back in reverse the video at 32 times the
normal play speed.
2X.21 Jog Reverse No No
○
No No *1
2X.22
Variable
Reverse
No No
○
No No *1
2X.23
Shuttle
Reverse
No No
○
No No *1
2X.31
Cue Up
With Data
No No
○ ○ ○
Pseudo clip "<BLACK>" is not supported.
20.52
Tension
Release
No No No No No
44.05
User Bits
Preset
No No No No No Not supported on T2.
40.20 In Reset No No
○ ○ ○
41.36
Timecode
Mode Preset
No
○
No No No
For R1, the setting will be applied to the
timecode that is recorded when video is
recorded.
For LTC, the timecode of TC input is
recorded, and for VITC, the timecode of SDI
input is recorded.
40.40
Auto Mode
Off
No No
○ ○ ○
40.41
Auto Mode
On
No No
○ ○ ○