Technical specifications, Installation, Unpacking – Electrolux EFG 535 User Manual

Page 10: Fitting, Electrical connection for uk only, Fig. 9 mounting accessories included

Advertising
background image

10

Technical Specifications

Model

EFG 540

EFG 535

Dimensions

Height (cm)

13,9

13,9

Width (cm)

52,4

52,4

Depth (cm)

28,9

28,9

Lighting

2 x 40 W

2 x 40 W

Grease filter

2

1

Power absorption

320 W

200 W

Electrical connection:

220-240 V

220-240 V

Subject to change without notice.

Installation

Unpacking

Check that the cooker hood has no damages.

Transportation damages should immediately be

reported to the company responsible for the

transportation.

Damages, faults and eventually missing details

should immediately be reported to the retailer.

Take care of the packing materials so that small

children cannot play with them.

Fitting

The hood is to be mounted on the wall.

When installed, the hood must be not less than

60cm. above electric burners or 70cm. above gas

or mixed-fuel burners (Fig. 9).

The hood can be installed above these heights but

for optimum performance it should be installed at

the distance quoted for the appropriate heat source.

Electrical connection for UK only

Safety warnings for the electrician

Connect the hood to the mains supply via a double

pole switch which has 3 mm minimum separation

between the contacts.

The switch must be accessible at all times.

The following is valid in the United Kingdom

only:

- the wire which is coloured blue must be

connected to the terminal which is marked with

the letter N or coloured black, -

- the wire which is coloured brown must be

connected to the terminal which is marked with

the letter L or coloured red.

Min

70 cm

Min

60 cm

Fig. 9

Mounting accessories included

1 Coupling ring

8 metal screws 2,9 x 16

Advertising
This manual is related to the following products: