Description of the appliance, Control panel, Extractor version – Electrolux EFG 535 User Manual

Page 4: Fig. 1 recirculation version, Fig. 2, Correct ventilation, Fig. 3

Advertising
background image

4

Description of the appliance

•• The cooker hood is supplied ready for use as a

recirculation hood and may be used for

extraction by removing the charcoal filter

which have been fitted inside the cooker hood.

Extractor version

• In this version fumes are extracted to the

outside via a hose connected to the coupling

ring. Fig. 1.

• In order to obtain the best performance the hose

should have a diameter equal to the outlet hole.

Fig. 1

Recirculation Version

• The air is filtered through charcoal filters and

returned to the kitchen. Fig. 2.

• You will need original ELECTROLUX

charcoal filters for the recirculation function.

(Available from your local Service Force

Centre)

Fig. 2

Coupling ring

Hose*

* The hose is not supplied and must be

purchased separately.

Cabinet

Charcoal filters

Hose*

Cabinet

* The hose is not supplied and must be

purchased separately.

Control Panel

• Best results are obtained by using a low speed

for normal conditions and a high speed when

odours are more concentrated.

Turn the hood on a few minutes before you start

cooking, you will then get an under pressure in

the kitchen. The hood should be left on after

cooking for about 15 minutes or until all the

odours have disappeared. The control switches

are located on the hood’s front panel:

Correct ventilation

If the cooker hood is to work correctly there must

be an under pressure in the kitchen. It is important

to keep the kitchen windows closed and have a

window in an adjacent room open.

Light switch

Motor switch

Fig. 3

Advertising
This manual is related to the following products: