Charcoal filter, Changing the light bulb, Fig. 8 – Electrolux EFG 535 User Manual

Page 6: Fig. 7

Advertising
background image

6

Charcoal filter

• The charcoal filter should only be used if you

want to use the hood in the recirculation

function.

• To do this you will need an original

ELECTROLUX charcoal filter (available from

your local Service Force Centre).

• Two charcoal filters are required for hood

model EFG 540, one charcoal filter is required

for hood model EFG 535.

• This filter cannot be cleaned or reused.

• As a general rule, the charcoal filter(s)

should be changed once every four months.

• Fitting.

Remove the frame pushing the two side release

keys "a". Fig. 7a-b.

Fit each charcoal filter so to cover the plastic

grid that protect the fan wheel, then turn

clockwise the central handle of the charcoal

filter. Fig. 8.

Refit the frame (snap into place).

• To remove proceed in the reverse order.

• Always specify the hood model code number

and serial number when ordering replacement

filters. This information is shown on the

registration plate located on the inside of the

unit.

• The charcoal filter can be ordered from your

local ELECTROLUX Service Force Centre.

Changing the light bulb

• Disconnect the cooker hood from the main

supply.

• Remove the frame pushing the two side release

keys "a". Fig. 7a-b.

• Replace the old bulb with a new one of the

same type.

• Refit the frame (Snap into place).

• If the light does not come on, make sure the

bulb has been inserted correctly before

contacting your local Service Force Centre.

Fig. 8

Charcoal filters
(EFG 540 : 2 pieces - EFG 535 : 1piece)

a

a

b

b

a

Fig. 7

Frame

Advertising
This manual is related to the following products: