Control parts and functions – Polaris 2000 Victory Special Edition User Manual
Page 23
16
CONTROL PARTS AND FUNCTIONS
Left Handlebar Controls
1. Dimmer and passing light
switch is pushed up for the high
beam, middle position is low
beam and bottom position is mo-
mentary passing beam.
2. Turn signal switch is
pushed to the right to signal a
right hand turn and pushed to the
left to signal a left hand turn.
Once the switch is released it will
return to the center position. To
cancel the signal, push the
switch in after it has returned to
the center position. NOTE: The
turn signals are self cancelling at
speeds above 6 miles per hour.
3. Horn switch sounds the
horn when pressed.
4. Fast idle lever is for cold
starting (See page 29 for starting
procedure).
5. Set Selector: (A) Odome-
ter, (B) Trip Odometer, (C) Clock,
(D) Back Light Dimming, (E)
High Beam Icon Dimming, (F)
Fuel Level, (G) Charging Sys-
tem Voltage, (H) Diagnostics, (I)
English/Metric Display. NOTE:
These features are used in con-
junction with the mode selector.
(See page 51 for setting proce-
dure.)
1
2
3
4
LH Driver’s View
LH Front Side
5