Polaris 2000 Universal Snowmobile - Manual (Page 52)

47
BATTERY
Battery Installation
WARNING
To avoid the possibility of explosion, always connect battery cables in the order
specified. Red (positive) cable first, black (negative) cable last.
1. Set the battery in its holder. Attach the hold down strap.
2. Install the battery vent line. It must be free from obstructions and securely
installed. Route the vent line away from the frame and body to prevent
corrosion.
WARNING
If the battery vent tube is pinched or kinked, battery gases could accumulate result-
ing in an explosion. Avoid skin contact with electrolyte as severe burns can result.
3. Connect and tighten the red (positive) cable first.
4. Connect and tighten the black (negative) cable last.
5. Verify that cables and vent hose are properly routed.