Features and controls, Switches – Polaris 2014 Ranger 400 User Manual

Page 26

Advertising
background image

24

FEATURES AND CONTROLS

Switches

Ignition Switch/Light Switch

The ignition switch is a four-position, key-
operated switch. The key can be removed
from the switch when it is in the OFF
position.

AWD/Differential Lock Switch

The AWD/Differential Switch has three positions: All
Wheel Drive (AWD), Differential Lock/Two Wheel
Drive (2WD) and Off (1WD/Turf Mode).

Press the top of the switch to engage All Wheel Drive
(AWD). See page 41 for AWD operating instructions.

Move the switch to the center position to lock the
differential and operate in two wheel drive (2WD).
Press the bottom of the switch to unlock the
differential and allow the rear drive wheels to operate
independently (1WD). This mode of operation is well
suited to turf driving or when active traction is not
needed.

See page 40 for Differential Lock operating
instructions.

OFF

The engine is off. Electrical circuits are off, except Acc,
12V.

LIGHTS ON

Lights are on. Electrical circuits are on. Electrical equip-
ment can be used.

LIGHTS OFF

Lights are off. Electrical circuits are on. Electrical equip-
ment can be used.

START

Turn the key to the START position to engage the electric
starter. Turn the key to the LIGHTS ON position after start-
ing the engine.

Ignition Switch

Light Switch

AWD/Differential Switch

Choke

Knob

Advertising