Polaris Series 10 Ranger 425 2x4 - Manual (Page 52)

50
FEATURES AND CONTROLS
Features
Seat Removal
To remove the seat, pull up
on the front of the seat and
slide it toward the front of
the vehicle.
Install the seat by sliding
the tabs into the rear of the
seat base and then push
down firmly on the front of
the seat until the pins are
fully seated into the
grommets.
Fuel Cap
The fuel tank filler cap (1) is
located on the right side by
the passengers seat. It has a
built in fuel gauge which
indicates the amount of fuel
in the tank. Use either
leaded or unleaded gasoline
with a minimum pump
octane number of 87 R+
M/2 octane.
Fuel Gauge
The fuel gauge, located on
the gas tank cap, indicates
the amount of fuel in the
fuel tank.
When the indicator needle
comes near the E (empty)
mark, refuel at the earliest
opportunity.
1