Polaris Series 10 Ranger 425 2x4 - Manual (Page 90)

88
MAINTENANCE AND LUBRICATION
Breather Filter and Hoses
1. Lift box and locate
the airbox (1).
2. Follow right hand
breather line out of the
side of the airbox and
locate filter (2).
3. Inspect filter for
debris. Blow through
gently in direction of
arrow on filter to check
for clogging. Replace
as needed.
4. Check hoses for
cracks, deterioration,
abrasion, or leaks.
Replace as needed.
5. Reinstall filter and clamps with arrow pointing toward engine.
Do not perform this operation immediately after the engine has
been run. The exhaust system becomes very hot and can cause
severe burns.
WARNING
1
2
CAUTION
Operation of your vehicle without a breather filter can cause
engine damage.