Warning, Features, Seat removal – Polaris Series 11 Ranger User Manual
Page 31: Seat belts

29
FEATURES
Seat Removal
Pull up on the front of the seat and
slide it toward the front of the
vehicle.
Install the seat by sliding the tabs
into the rear of the seat base. Push
down firmly on the front of the
seat until the pins are fully
seated into the grommets.
Seat Belts
The RANGER is equipped with lap-style seat belts for the operator and
passenger.
To wear the seat belt properly, follow this procedure:
1. Place the belt across your lap as low on your hips as possible,
taking care that the belt is not twisted.
2. Push the latch plate into the buckle until it clicks.
3. Release the strap, it will self tighten. NOTE: The center belt must
be tightened manually by pulling on the strap.
To unfasten, press the square red button in the buckle’s center.
WARNING
Falling from a moving vehicle could result in serious injury or death.
Always fasten your seatbelt securely before operating or riding in
the RANGER.
Passengers under five years of age require special restraints,
which are not available with this vehicle. No person under the age
of five years may ride in the RANGER.