HEIDENHAIN ND 281 B v.1 - Manual (Page 14)

14
HEIDENHAIN
REF 2 1 SET START PRINT in.
MIN ACTL MAX DIFF = < >
7 8 9
4 5 6
1 2 3
0 . – CL
MOD
PC
Measured Value Output
The RS-232-C/V.24 interface (X31) enables you to connect a
printer or a PC to your display unit
Measured Value Output
For technical information on the RS-232-C/V.24 data
interface (X31), information on the data format, etc.,
see the chapter “RS-232-C/V.24 Interface (X31).”
Measured values can be output over the RS-232-C/V.24
interface (X31), for example to a printer or PC.
There are several ways to start measured value output:
➤ ➤ ➤ ➤ ➤ In the linear measurement mode:
Press MOD repeatedly until the PRINT indicator blinks,
then start measured value output with ENT.
In the angular measurement mode:
Press the MOD key (this feature can be disabled with the
operating parameter 86).
or
➤ ➤ ➤ ➤ ➤ Input the command STX (Ctrl B) over the RXD input of the
RS-232-C/V.24 interface (X31);
or
➤ ➤ ➤ ➤ ➤ Input a signal for measured data output (Pulse or Contact)
at the D-sub connection EXT (X41).