7 programming: miscellaneous functions, Programming: miscellaneous functions – HEIDENHAIN iTNC 530 (340 49x-01) User Manual
Page 21
HEIDENHAIN iTNC 530
21
7.1 Entering Miscellaneous Functions M and STOP ..... 230
7.2 Miscellaneous Functions for Program Run Control, Spindle and Coolant ..... 231
7.3 Miscellaneous Functions for Coordinate Data ..... 232
Programming machine-referenced coordinates: M91/M92 ..... 232
Activating the most recently entered datum: M104 ..... 234
Moving to positions in a non-tilted coordinate system with a tilted working plane: M130 ..... 234
7.4 Miscellaneous Functions for Contouring Behavior ..... 235
Smoothing corners: M90 ..... 235
Insert rounding arc between straight lines: M112 ..... 236
Do not include points when executing non-compensated line blocks: M124 ..... 236
Machining small contour steps: M97 ..... 237
Machining open contours: M98 ..... 239
Feed rate factor for plunging movements: M103 ..... 240
Feed rate in millimeters per spindle revolution: M136 ..... 241
Feed rate for circular arcs: M109/M110/M111 ..... 242
Calculating the radius-compensated path in advance (LOOK AHEAD): M120 ..... 242
Superimposing handwheel positioning during program run: M118 ..... 244
Retraction from the contour in the tool-axis direction: M140 ..... 245
Suppressing touch probe monitoring: M141 ..... 246
Delete modal program information: M142 ..... 247
Delete basic rotation: M143 ..... 247
Automatically retract tool from the contour at an NC stop: M148 ..... 248