HEIDENHAIN iTNC 530 (340 49x-04) Touch Probe Cycles - Manual (Page 161)

HEIDENHAIN iTNC 530 161
4.1 Kinematic Measur
ement with TS
T
ouc
h Pr
obes (Option KinematicsOpt)
Log function
After running Cycle 450, the TNC makes a measuring log containing
the following information:
„ Creation date and time of the log
„ Path of the NC program from which the cycle was run
„ Mode used (0=Save/1=Restore)?
„ Number of the memory space (0 to 9)
„ Line number of the kinematic configuration in the kinematic table
„ Code number, if you entered one immediately before running Cycle
450.