Before you operate the monitor, En-5200e – Envision Peripherals EN-5200e User Manual
Page 8
Advertising
EN-5200e
8
31MY02
EN-5200e
Before You Operate the Monitor
Preparing To Install An Optional Wall Mounting Arm (Not Supplied)
This monitor can be attached to a wall mounting arm you can purchase separately. Disconnect power
before performing this procedure. Follow these step.
1. Pull the screw covers off the back of the monitor.
2. Support the base and remove the screws.
3. Remove the base.
4. Follow the manufacturer’s instructions to assemble the wall mounting arm.
See next page for further installation instructions.
Advertising