Envision Peripherals EN-5200e - Manual (Page 9)

EN-5200e
9 31MY02 EN-5200e
Before You Operate the Monitor
nstall An Optional Wall Mounting Arm (Not Supplied)
Follow these steps to finish installing the wall mounting arm:
1. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in
the back of the monitor.
2. Insert the 4 screws into the holes and tighten.
3. Insert the power cable into the slot on the back of the monitor.
NOTE: The Envision EN-5200e is compatible with the Ergotron line of mounting and arm solutions. Visit
their website at www.ergotron.com for more information on the many ways on which you can mount your
AOC LCD monitor.