HEIDENHAIN iTNC 530 (34049x-08) - Manual (Page 520)

520 Programming: Multiple axis machining
12.6 Thr
ee-dimensional t
o
ol compensation (sof
tw
ar
e option 2)
Example: Block format with surface-normal vectors withouttool
orientation
Example: Block format with surface-normal vectors andtool
orientation
LN X+31.737 Y+21.954 Z+33.165 NX+0.2637581 NY+0.0078922
NZ–0.8764339 F1000 M128
LN X+31.737 Y+21.954 Z+33.165 NX+0.2637581 NY+0.0078922
NZ–0.8764339 TX+0.0078922 TY–0.8764339 TZ+0.2590319 F1000
M128
LN : Straight line with 3-D compensation
X, Y, Z : Compensated coordinates of the straight-line end point
NX, NY, NZ : Components of the surface-normal vector
TX, TY, TZ : Components of the normalized vector for workpiece
orientation
F : Feed rate
M : Miscellaneous function