SMA FANKIT01-10 - Manual (Page 18)

7 Disassembling SMA Solar Technology AG
18 FANKIT01-IA-en-12 Installation Manual
7 Disassembling
7.1 Disassembling the Fan Retrofit Kit
1. Disconnect the inverter from voltage sources and open it (see inverter installation manual).
2. If the multifunction relay is assigned, disconnect the supply voltage to the multi-function relay
and ensure that the device cannot be reconnected.
3. Wait for the fan to stop rotating.
4. Press the locking levers of the left-hand socket on
the display outwards and remove the ribbon cable
plug.
5. Loosen the screw on the display and flip the display
up until it clicks into place.
6. Release and remove the fan plug.
1
2
1
2