SMA FANKIT02-10 - Manual (Page 15)

SMA America, LLC 5 Installation
Installation Manual FANKIT02-IA-US_en-12 15
8. Remove the filler-plugs from left-hand enclosure
opening.
9. Unscrew the counternut from the supplied cable gland for the fan cable.
10. Insert the fan cable through the left-hand enclosure opening from the outside into the inverter.
11. Insert the fan cable gland in the enclosure opening
and fasten from the inside to the enclosure using the
counternut.
12. Fasten the swivel nut hand-tight.
13. Ensure that the fan cable is securely positioned.
14. Insert the fan plug into the fan connection of the
emergency power module.
15. Flip the display down and fasten the screw
hand-tight.
16. Close the inverter and recommission it
(see the inverter installation manual).
Retaining the filler-plug
Keep the filler-plug in a safe place. It may be needed again if the the fan retrofit kit is later
removed from the inverter (see Section 6.1.1 "Disassembling the Fan Kit", page 19).