SMA SUNNY WEBBOX User Manual
Page 56
8 Plant Properties
SMA Solar Technology AG
56
SPortal-WB-CLCON-BA-en-25
User Manual
5. Select the type of irradiation sensor. The following settings are possible:
6. In the "Temperature sensor" field, select the sensor based on the serial number of the
Cluster Controller / Sunny SensorBox.
7. Select type of temperature sensor. The following settings are possible:
8. In the "Tolerance range between" field, enter the upper and lower limits of the tolerance range
for the performance ratio (default settings: 0.0 und 1.0). If the performance ratio is outside the
tolerance range, a warning will be logged in the plant logbook.
9. Select [Save].
ExtSolIrr
External irradiation sensor
IntSolIrr
Internal irradiation sensor (only with Sunny SensorBox)
TmpAmb
Ambient temperature sensor
TmpMdul
Module temperature sensor