SMA BLUETOOTH REPEATER - Manual (Page 14)

Mounting SMA Solar Technology AG
14 BTREPIN-IA-IEN100211 Installation Manual
• Position the SMA Bluetooth Repeater at another location and re-check the connection
qualities.
• If necessary install additional SMA Bluetooth Repeaters.
5.2 Mounting the SMA Bluetooth Repeater on the wall.
Mounting accessories required:
• 1 Bracket
• 1 Screw
• 1 Screw anchor
1. Remove the bracket from the guide rail on the rear
side of the SMA Bluetooth Repeater. Lift the
bracket via the strap and press against the guide
rail.
2. Mark the drill hole. Observe the distances
between the drill hole and the enclosure sides.
3. Drill a hole with a diameter of 6 mm at the position
marked.
4. Affix the bracket to the wall using the screw anchor
and the screw. Align the bracket so that both pins
point upwards and the SMA logo faces to the
front.
15 mm
60 mm
70 mm 70 mm